What is the I/O Device Error?
The error message “The Request Could Not be Performed Because of an I/O Device Error” is a common error message that we might encounter when we try to access the data from our USB flash drives, External Hard drives, CDs, or any other external storage devices. This I/O basically (Input/Output ) Error is generally caused when the external drive is corrupted or may not be plugged correctly. Rather than this error message you might also face error messages like “Only part of a ReadProcessMemory or WriteProcessMemory request was completed” or ” I/O Error codes: error 6, error 21″.
Fix: The Request Could Not be Performed Because of an I/O Device Error
Are you facing an I/O Device Error and frustrated? Then you are at the right place, In this article, we will solve the I/O device Error and will discover the various causes of this error and various methods to fix this error.
Before going in-depth into the methods to fix this error let us understand a little bit about this error and what are the causes that lead to this error in our systems.
Table of Content
- Method 1: Update the Device Drivers
- Method 2: Use the Check Disk Utility
- Method 3: Use the Diskpart Utility.
- Method 4: Change the File system of your External Device
- Method 5: Change Data Transfer Mode of your IDE Controllers.
- Method 6: Perform Clean Boot on your Windows.
- Method 7: Change the External Drive’s Letter.
- Method 8: Check for Malware or Viruses
- Method 9: Check Hardware Connections
Contact Us