Change the External Drive’s Letter.
You must have noticed that a letter like E or F is associated with your external drive. Sometimes a specific letter might be reserved by some permanent storage drive. So to fix this you can change the drive letter which is causing the I/O device error. Follow the below-mentioned steps to change the Drive’s letter.
Step 1: Search for disk management in Windows and open it.
You will see the following interface after opening this disk management
Step 2: Right-click on the external drive and click on Change drive letter and paths.
Step 3: Click on Change.
Step 4: Select the drive letter of your choice from the drop-down and click on OK.
Step 5: Eject your external drive and plug it the I/O device error will be resolved now hopefully.
Fix: The Request Could Not be Performed Because of an I/O Device Error
Are you facing an I/O Device Error and frustrated? Then you are at the right place, In this article, we will solve the I/O device Error and will discover the various causes of this error and various methods to fix this error.
Before going in-depth into the methods to fix this error let us understand a little bit about this error and what are the causes that lead to this error in our systems.
Table of Content
- Method 1: Update the Device Drivers
- Method 2: Use the Check Disk Utility
- Method 3: Use the Diskpart Utility.
- Method 4: Change the File system of your External Device
- Method 5: Change Data Transfer Mode of your IDE Controllers.
- Method 6: Perform Clean Boot on your Windows.
- Method 7: Change the External Drive’s Letter.
- Method 8: Check for Malware or Viruses
- Method 9: Check Hardware Connections
Contact Us