Fetching Router’s IP Address using CMD on PC
Step 1: Open Command Prompt or type ‘cmd‘ at the start.
Step 2: Enter config to see the default Gateway IP Address as shown in the image below.
Step 3: You can see in the above screenshot that our default IP address is 192.168.1.1
Step 4: Enter the same IP address in a browser to log in to Wi-Fi router settings.
Step 5: Enter your username and password credentials. In my case, the default login credentials are “admin” for both username and password.
Step 6: If you forgot the custom password you set earlier or cannot log in with the default credentials, reset the router to default factory settings.
How to Gain Access to Wi-Fi Router Settings?
A Wi-Fi Router is a networking device that directs data traffic to various connected networks using a unique IP address. A wired router just connects directly to a device (computer) via cable. It is usually connected to an external internet service provider via a Cat4(Category 4 cable), fiber optic cable, or a telephone line.
Contact Us