Conversion for Flip Flops

The Excitation Table of the Flip Flop can be given as

EXCITATION TABLE:

Steps To Convert from One Flip Flop to Other

Let there be required flipflop to be constructed using sub-flipflop:

  1. Draw the truth table of the required flip-flop.
  2. Write the corresponding outputs of sub-flipflop to be used from the excitation table.
  3. Draw K-Maps using required flipflop inputs and obtain excitation functions for sub-flipflop inputs.
  4. Construct a logic diagram according to the functions obtained.

Convert SR To JK Flip Flop

The Table for the SR To JK is given as

Excitation Functions and Logic Diagram

Function and Logic Diagram for the conversion is given below

 

Convert SR To D Flip Flop

The Table for the SR To JK is given as

Excitation Functions and Logic Diagram

Function and Logic Diagram for the conversion is given below

Flip-Flop types, their Conversion and Applications

In this article, we will go through the Flip-Flop types, their Conversion and their Applications, First, we will go through the definition of the flip-flop with its types in brief, and then we will go through the conversion of the flip-flop with its applications, At last, we will conclude our article with some FAQs.

Table of Content

  • Flip-Flop
  • Types
  • S-R Flip Flop
  • J-K Flip Flop
  • D Flip Flop
  • T Flip Flop
  • Conversion for Flip Flops
  •  Applications

Similar Reads

What is a Flip-Flop?

The flip-flop is a circuit that maintains a state until directed by input to change the state. A basic flip-flop can be constructed using four-NAND or four-NOR gates. Flip-flop is popularly known as the basic digital memory circuit. It has its two states as logic 1(High) and logic 0(low) states. A flip flop is a sequential circuit which consist of single binary state of information or data. The digital circuit is a flip flop which has two outputs and are of opposite states. It is also known as a Bistable Multivibrator....

Types of Flip-Flops

Given Below are the Types of Flip-Flop...

S-R Flip Flop

In the flip flop, with the help of preset and clear when the power is switched ON, the states of the circuit keeps on changing, that is it is uncertain. It may come to set(Q=1) or reset(Q’=0) state. In many applications, it is desired to initially set or reset the flip flop that is the initial state of the flip flop that needs to be assigned. This thing is accomplished by the preset(PR) and the clear(CLR)....

J-K Flip Flop

In JK flip flops, The basic structure of the flip flop which consists of Clock (CLK), Clear (CLR), Preset (PR)....

D Flip Flop

The D Flip Flop Consists a single data input(D), a clock input(CLK),and two outputs: Q and Q’ (the complement of Q)....

T Flip Flop

The T Flip Flop consists of data input (T), a clock input (CLK), and two outputs: Q and Q’ (the complement of Q)....

Conversion for Flip Flops

The Excitation Table of the Flip Flop can be given as...

Applications of Flip-Flops

These are the various types of flip-flops being used in digital electronic circuits and the applications of Flip-flops are as specified below....

Conclusion

In this article we have gone through definition of the flip flop in brief with its different types, we have also gone through conversion of flip and the Application of the Flip Flop....

Flip-Flop Types – FAQs

What is the difference between edge-triggered and level-triggered flip-flops?...

Contact Us