Steps for Data Transmission in Mesh Topology
Step 1: Packet Routing
Firstly, if any device wants to send the data, then the data is basically breakdown into the packets. Each of these packets has the information which is regarding to the source destination and the actual content.
Step 2: Routing Algorithms
Once the data is ready for the transmission, the device mainly uses the routing algorithms, which selects the best path for each packet transmission, which is based on the specific criteria like network traffic, shortage distance, etc.
Step 3: Device to Device Communication
After this, the packets are transferred from one node to another, along with the chosen path of transmission. The nodes can be any devices, like computers, switches, or their routers.
Step 4: Hop to Hop Transmission
In the communication each node passes the packet to the next node till it finds its desired destination node. This step ensures the data delivery even if some nodes or parts are unavailable.
Step 5: Fault Tolerance
In the mesh topology, the redundancy can be occurred as there are multiple paths between the nodes. h If any of the path gets filled, then the data is been sent through the different available route.
Step 6: End to End Delivery
Finally, the data or the packets are being released to the desired destination And then the end device reassembles the data to get the proper content.
Contact Us