Polygon Clipping | Sutherland–Hodgman Algorithm
A convex polygon and a convex clipping area are given. The task is to clip polygon edges using the Sutherland–Hodgman Algorithm. Input is in the form of vertices of the polygon in clockwise order. Examples:
Input : Polygon : (100,150), (200,250), (300,200)
Clipping Area : (150,150), (150,200), (200,200),
(200,150) i.e. a Square
Output : (150, 162) (150, 200) (200, 200) (200, 174)
Example 2
Input : Polygon : (100,150), (200,250), (300,200)
Clipping Area : (100,300), (300,300), (200,100)
Output : (242, 185) (166, 166) (150, 200) (200, 250) (260, 220)
Overview of the algorithm:
Consider each edge e of clipping Area and do following:
a) Clip given polygon against e.
How to clip against an edge of clipping area? The edge (of clipping area) is extended infinitely to create a boundary and all the vertices are clipped using this boundary. The new list of vertices generated is passed to the next edge of the clip polygon in clockwise fashion until all the edges have been used.
There are four possible cases for any given edge of given polygon against current clipping edge e.
- Both vertices are inside : Only the second vertex is added to the output list
- First vertex is outside while second one is inside : Both the point of intersection of the edge with the clip boundary and the second vertex are added to the output list
- First vertex is inside while second one is outside : Only the point of intersection of the edge with the clip boundary is added to the output list
- Both vertices are outside : No vertices are added to the output list
There are two sub-problems that need to be discussed before implementing the algorithm:- To decide if a point is inside or outside the clipper polygon If the vertices of the clipper polygon are given in clockwise order then all the points lying on the right side of the clipper edges are inside that polygon. This can be calculated using : To find the point of intersection of an edge with the clip boundary If two points of each line(1,2 & 3,4) are known, then their point of intersection can be calculated using the formula :-
Sutherland-Hodgeman Polygon Clipping Algorithm :
- Read coordinates of all vertices of the polygon.
- Read coordinates of the clipping window
- Consider the left edge of the window
- Compare the vertices of each edge of the polygon, individually with the clipping plane
- Save the resulting intersections and vertices in the new list of vertices according to four possible relationships between the edge and the clipping boundary discussed earlier.
- Repeat the steps 4 and 5 for remaining edges of the clipping window. Each time the resultant list of vertices is successively passed to process the next edge of the clipping window.
- Stop.
#include<iostream>
using namespace std;
const int MAX_POINTS = 20;
// Returns x-value of point of intersection of two lines
int x_intersect(int x1, int y1, int x2, int y2,
int x3, int y3, int x4, int y4)
{
int num = (x1*y2 - y1*x2) * (x3-x4) -
(x1-x2) * (x3*y4 - y3*x4);
int den = (x1-x2) * (y3-y4) - (y1-y2) * (x3-x4);
return num/den;
}
// Returns y-value of point of intersection of two lines
int y_intersect(int x1, int y1, int x2, int y2,
int x3, int y3, int x4, int y4)
{
int num = (x1*y2 - y1*x2) * (y3-y4) -
(y1-y2) * (x3*y4 - y3*x4);
int den = (x1-x2) * (y3-y4) - (y1-y2) * (x3-x4);
return num/den;
}
// This function clips all the edges w.r.t one clip edge of clipping area
void clip(int poly_points[][2], int &poly_size,
int x1, int y1, int x2, int y2)
{
int new_points[MAX_POINTS][2], new_poly_size = 0;
// (ix,iy),(kx,ky) are the co-ordinate values of the points
for (int i = 0; i < poly_size; i++)
{
// i and k form a line in polygon
int k = (i+1) % poly_size;
int ix = poly_points[i][0], iy = poly_points[i][1];
int kx = poly_points[k][0], ky = poly_points[k][1];
// Calculating position of first point w.r.t. clipper line
int i_pos = (x2-x1) * (iy-y1) - (y2-y1) * (ix-x1);
// Calculating position of second point w.r.t. clipper line
int k_pos = (x2-x1) * (ky-y1) - (y2-y1) * (kx-x1);
// Case 1 : When both points are inside
if (i_pos < 0 && k_pos < 0)
{
// Only second point is added
new_points[new_poly_size][0] = kx;
new_points[new_poly_size][1] = ky;
new_poly_size++;
}
// Case 2: When only first point is outside
else if (i_pos >= 0 && k_pos < 0)
{
// Point of intersection with edge and the second point is added
new_points[new_poly_size][0] = x_intersect(x1, y1, x2, y2, ix, iy, kx, ky);
new_points[new_poly_size][1] = y_intersect(x1, y1, x2, y2, ix, iy, kx, ky);
new_poly_size++;
new_points[new_poly_size][0] = kx;
new_points[new_poly_size][1] = ky;
new_poly_size++;
}
// Case 3: When only second point is outside
else if (i_pos < 0 && k_pos >= 0)
{
// Only point of intersection with edge is added
new_points[new_poly_size][0] = x_intersect(x1, y1, x2, y2, ix, iy, kx, ky);
new_points[new_poly_size][1] = y_intersect(x1, y1, x2, y2, ix, iy, kx, ky);
new_poly_size++;
}
// Case 4: When both points are outside, no points are added
}
// Copying new points into original array and changing the no. of vertices
poly_size = new_poly_size;
for (int i = 0; i < poly_size; i++)
{
poly_points[i][0] = new_points[i][0];
poly_points[i][1] = new_points[i][1];
}
}
// Implements Sutherland–Hodgman algorithm
void suthHodgClip(int poly_points[][2], int poly_size,
int clipper_points[][2], int clipper_size)
{
// i and k are two consecutive indexes
for (int i = 0; i < clipper_size; i++)
{
int k = (i + 1) % clipper_size;
// We pass the current array of vertices, its size and the end points of the selected clipper line
clip(poly_points, poly_size, clipper_points[i][0],
clipper_points[i][1], clipper_points[k][0],
clipper_points[k][1]);
}
// Printing vertices of clipped polygon
for (int i = 0; i < poly_size; i++)
cout << "(" << poly_points[i][0] << ", " << poly_points[i][1] << ") ";
}
// Driver code
int main()
{
// Defining polygon vertices in clockwise order
int poly_size = 3;
int poly_points[20][2] = {{100, 150}, {200, 250}, {300, 200}};
// Defining clipper polygon vertices in clockwise order
// 1st Example with square clipper
int clipper_size = 4;
int clipper_points[][2] = {{150, 150}, {150, 200}, {200, 200}, {200, 150}};
// 2nd Example with triangle clipper
/*int clipper_size = 3;
int clipper_points[][2] = {{100, 300}, {300, 300}, {200, 100}};*/
// Calling the clipping function
suthHodgClip(poly_points, poly_size, clipper_points, clipper_size);
return 0;
}
import java.util.*;
public class Main {
static final int MAX_POINTS = 20;
// Returns x-value of point of intersection of two lines
static int x_intersect(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4) {
int num = (x1 * y2 - y1 * x2) * (x3 - x4) - (x1 - x2) * (x3 * y4 - y3 * x4);
int den = (x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4);
return num / den;
}
// Returns y-value of point of intersection of two lines
static int y_intersect(int x1, int y1, int x2, int y2, int x3, int y3, int x4, int y4) {
int num = (x1 * y2 - y1 * x2) * (y3 - y4) - (y1 - y2) * (x3 * y4 - y3 * x4);
int den = (x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4);
return num / den;
}
// This functions clips all the edges w.r.t one clip edge of clipping area
static void clip(ArrayList<int[]> poly_points, int x1, int y1, int x2, int y2) {
ArrayList<int[]> new_points = new ArrayList<>();
for (int i = 0; i < poly_points.size(); i++) {
// i and k form a line in polygon
int k = (i + 1) % poly_points.size();
int ix = poly_points.get(i)[0], iy = poly_points.get(i)[1];
int kx = poly_points.get(k)[0], ky = poly_points.get(k)[1];
// Calculating position of first point w.r.t. clipper line
int i_pos = (x2 - x1) * (iy - y1) - (y2 - y1) * (ix - x1);
// Calculating position of second point w.r.t. clipper line
int k_pos = (x2 - x1) * (ky - y1) - (y2 - y1) * (kx - x1);
// Case 1 : When both points are inside
if (i_pos < 0 && k_pos < 0) {
//Only second point is added
new_points.add(new int[]{kx, ky});
}
// Case 2: When only first point is outside
else if (i_pos >= 0 && k_pos < 0) {
// Point of intersection with edge and the second point is added
new_points.add(new int[]{x_intersect(x1, y1, x2, y2, ix, iy, kx, ky), y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)});
new_points.add(new int[]{kx, ky});
}
// Case 3: When only second point is outside
else if (i_pos < 0 && k_pos >= 0) {
//Only point of intersection with edge is added
new_points.add(new int[]{x_intersect(x1, y1, x2, y2, ix, iy, kx, ky), y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)});
}
// Case 4: When both points are outside
else {
//No points are added
}
}
// Copying new points into original array and changing the no. of vertices
poly_points.clear();
poly_points.addAll(new_points);
}
// Implements Sutherland–Hodgman algorithm
static void suthHodgClip(ArrayList<int[]> poly_points, ArrayList<int[]> clipper_points) {
//i and k are two consecutive indexes
for (int i = 0; i < clipper_points.size(); i++) {
int k = (i + 1) % clipper_points.size();
// We pass the current array of vertices, it's size and the end points of the selected clipper line
clip(poly_points, clipper_points.get(i)[0], clipper_points.get(i)[1], clipper_points.get(k)[0], clipper_points.get(k)[1]);
}
// Printing vertices of clipped polygon
for (int[] point : poly_points)
System.out.println("(" + point[0] + ", " + point[1] + ")");
}
//Driver code
public static void main(String[] args) {
// Defining polygon vertices in clockwise order
ArrayList<int[]> poly_points = new ArrayList<>(Arrays.asList(new int[]{100, 150}, new int[]{200, 250}, new int[]{300, 200}));
// Defining clipper polygon vertices in clockwise order
// 1st Example with square clipper
ArrayList<int[]> clipper_points = new ArrayList<>(Arrays.asList(new int[]{150, 150}, new int[]{150, 200}, new int[]{200, 200}, new int[]{200, 150}));
// 2nd Example with triangle clipper
// ArrayList<int[]> clipper_points = new ArrayList<>(Arrays.asList(new int[]{100, 300}, new int[]{300, 300}, new int[]{200, 100}));
//Calling the clipping function
suthHodgClip(poly_points, clipper_points);
}
}
# Importing required libraries
import numpy as np
# Defining maximum number of points in polygon
MAX_POINTS = 20
# Function to return x-value of point of intersection of two lines
def x_intersect(x1, y1, x2, y2, x3, y3, x4, y4):
num = (x1*y2 - y1*x2) * (x3-x4) - (x1-x2) * (x3*y4 - y3*x4)
den = (x1-x2) * (y3-y4) - (y1-y2) * (x3-x4)
return num/den
# Function to return y-value of point of intersection of two lines
def y_intersect(x1, y1, x2, y2, x3, y3, x4, y4):
num = (x1*y2 - y1*x2) * (y3-y4) - (y1-y2) * (x3*y4 - y3*x4)
den = (x1-x2) * (y3-y4) - (y1-y2) * (x3-x4)
return num/den
# Function to clip all the edges w.r.t one clip edge of clipping area
def clip(poly_points, poly_size, x1, y1, x2, y2):
new_points = np.zeros((MAX_POINTS, 2), dtype=int)
new_poly_size = 0
# (ix,iy),(kx,ky) are the co-ordinate values of the points
for i in range(poly_size):
# i and k form a line in polygon
k = (i+1) % poly_size
ix, iy = poly_points[i]
kx, ky = poly_points[k]
# Calculating position of first point w.r.t. clipper line
i_pos = (x2-x1) * (iy-y1) - (y2-y1) * (ix-x1)
# Calculating position of second point w.r.t. clipper line
k_pos = (x2-x1) * (ky-y1) - (y2-y1) * (kx-x1)
# Case 1 : When both points are inside
if i_pos < 0 and k_pos < 0:
# Only second point is added
new_points[new_poly_size] = [kx, ky]
new_poly_size += 1
# Case 2: When only first point is outside
elif i_pos >= 0 and k_pos < 0:
# Point of intersection with edge and the second point is added
new_points[new_poly_size] = [x_intersect(x1, y1, x2, y2, ix, iy, kx, ky),
y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)]
new_poly_size += 1
new_points[new_poly_size] = [kx, ky]
new_poly_size += 1
# Case 3: When only second point is outside
elif i_pos < 0 and k_pos >= 0:
# Only point of intersection with edge is added
new_points[new_poly_size] = [x_intersect(x1, y1, x2, y2, ix, iy, kx, ky),
y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)]
new_poly_size += 1
# Case 4: When both points are outside
else:
pass # No points are added, but we add a pass statement to avoid the IndentationError
# Copying new points into a separate array and changing the no. of vertices
clipped_poly_points = np.zeros((new_poly_size, 2), dtype=int)
for i in range(new_poly_size):
clipped_poly_points[i] = new_points[i]
return clipped_poly_points, new_poly_size
# Function to implement Sutherland–Hodgman algorithm
def suthHodgClip(poly_points, poly_size, clipper_points, clipper_size):
# i and k are two consecutive indexes
for i in range(clipper_size):
k = (i+1) % clipper_size
# We pass the current array of vertices, it's size and the end points of the selected clipper line
poly_points, poly_size = clip(poly_points, poly_size, clipper_points[i][0],
clipper_points[i][1], clipper_points[k][0],
clipper_points[k][1])
# Printing vertices of clipped polygon
for i in range(poly_size):
print('(', poly_points[i][0], ', ', poly_points[i][1], ')')
# Driver code
if __name__ == "__main__":
# Defining polygon vertices in clockwise order
poly_size = 3
poly_points = np.array([[100,150], [200,250], [300,200]])
# Defining clipper polygon vertices in clockwise order
# 1st Example with square clipper
clipper_size = 4
clipper_points = np.array([[150,150], [150,200], [200,200], [200,150]])
# 2nd Example with triangle clipper
# clipper_size = 3
# clipper_points = np.array([[100,300], [300,300], [200,100]])
# Calling the clipping function
suthHodgClip(poly_points, poly_size, clipper_points, clipper_size)
// Maximum number of points
const MAX_POINTS = 20;
// Returns x-value of point of intersection of two lines
function x_intersect(x1, y1, x2, y2, x3, y3, x4, y4) {
let num = (x1 * y2 - y1 * x2) * (x3 - x4) - (x1 - x2) * (x3 * y4 - y3 * x4);
let den = (x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4);
return num / den;
}
// Returns y-value of point of intersection of two lines
function y_intersect(x1, y1, x2, y2, x3, y3, x4, y4) {
let num = (x1 * y2 - y1 * x2) * (y3 - y4) - (y1 - y2) * (x3 * y4 - y3 * x4);
let den = (x1 - x2) * (y3 - y4) - (y1 - y2) * (x3 - x4);
return num / den;
}
// This function clips all the edges w.r.t one clip edge of clipping area
function clip(poly_points, x1, y1, x2, y2) {
let new_points = [];
for (let i = 0; i < poly_points.length; i++) {
// i and k form a line in polygon
let k = (i + 1) % poly_points.length;
let ix = poly_points[i][0], iy = poly_points[i][1];
let kx = poly_points[k][0], ky = poly_points[k][1];
// Calculating position of first point w.r.t. clipper line
let i_pos = (x2 - x1) * (iy - y1) - (y2 - y1) * (ix - x1);
// Calculating position of second point w.r.t. clipper line
let k_pos = (x2 - x1) * (ky - y1) - (y2 - y1) * (kx - x1);
// Case 1 : When both points are inside
if (i_pos < 0 && k_pos < 0) {
//Only second point is added
new_points.push([kx, ky]);
}
// Case 2: When only first point is outside
else if (i_pos >= 0 && k_pos < 0) {
// Point of intersection with edge and the second point is added
new_points.push([x_intersect(x1, y1, x2, y2, ix, iy, kx, ky), y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)]);
new_points.push([kx, ky]);
}
// Case 3: When only second point is outside
else if (i_pos < 0 && k_pos >= 0) {
//Only point of intersection with edge is added
new_points.push([x_intersect(x1, y1, x2, y2, ix, iy, kx, ky), y_intersect(x1, y1, x2, y2, ix, iy, kx, ky)]);
}
// Case 4: When both points are outside
else {
//No points are added
}
}
// Copying new points into original array and changing the no. of vertices
poly_points.length = 0;
Array.prototype.push.apply(poly_points, new_points);
}
// Implements Sutherland–Hodgman algorithm
function suthHodgClip(poly_points, clipper_points) {
//i and k are two consecutive indexes
for (let i = 0; i < clipper_points.length; i++) {
let k = (i + 1) % clipper_points.length;
// We pass the current array of vertices, it's size and the end points of the selected clipper line
clip(poly_points, clipper_points[i][0], clipper_points[i][1], clipper_points[k][0], clipper_points[k][1]);
}
// Printing vertices of clipped polygon
for (let point of poly_points)
console.log("(" + point[0] + ", " + point[1] + ")");
}
//Driver code
(function main() {
// Defining polygon vertices in clockwise order
let poly_points = [[100, 150], [200, 250], [300, 200]];
// Defining clipper polygon vertices in clockwise order
// 1st Example with square clipper
let clipper_points = [[150, 150], [150, 200], [200, 200], [200, 150]];
// 2nd Example with triangle clipper
// let clipper_points = [[100, 300], [300, 300], [200, 100]];
//Calling the clipping function
suthHodgClip(poly_points, clipper_points);
})();
Output:
(150, 162) (150, 200) (200, 200) (200, 174)
Related Articles: Line Clipping | Set 1 (Cohen–Sutherland Algorithm) Point Clipping Algorithm in Computer Graphics
Contact Us