How to Use a Sphygmomanometer?
The procedure of using a sphygmomanometer is as follows:
- First ask the patient to be in a relaxed state, wrap the cuff around the arm of the patient just three fingers above the antecubital fossa. Make sure that the cuff is not too tight and not too loose there should be enough space between arm and cuff to insert one or two fingers
- Inflate the rubber bulb and put a diaphragm of stethoscope on the brachial artery (antecubital fossa) , inflate it till 180 mmHg .
- Start deflating it by adjusting the valve until you hear a beating sound . The point where sound comes is called systolic pressure. Normal systolic pressure should be 120 mmHg. Systolic pressure more than 130 mmHg is high blood pressure.
- Note the systolic pressure and continue deflating the cuff again by adjusting the valve till the beating sound disappears ,this is the diastolic pressure. Normal diastolic pressure should be 80 mmHg. Diastolic pressure more than 90 mmHg is called hypertension.
Diagram of Sphygmomanometer
The diagram of sphygmomanometer helps us understand the various parts of the device. A sphygmomanometer is used to measure blood pressure. It enables healthcare professionals to detect various conditions accurately and on time. In this article, we are going to learn about the diagram of sphygmomanometer, along with its various parts and the different types of sphygmomanometer.
Table of Content
- Diagram of Sphygmomanometer?
- What is Sphygmomanometer
- Parts of Sphygmomanometer
- Types of Sphygmomanometer
- How to Use a Sphygmomanometer?
- Conclusion – Diagram of Sphygmomanometer
- FAQs on Diagram of Sphygmomanometer
Contact Us