Clock Skew in synchronous digital circuit systems
In Synchronous circuits where all the logic elements share the same clock signal, it becomes imperative to design these elements as close to the clock source as possible because a system-on-chip, FPGA, CPLD contain Billions of transistors. Even though these distances are minute due to their sheer number there is a propagation delay which leads to the clock signal arriving at different parts of the chip at different times. This is called Clock Skew.
In Digital Circuit Design a ” Sequentially Adjacent ” circuit is one where if a pulse emitted from a common source is supposed to arrive at the same time. Using this definition we can write a mathematical expression for clock skew as
Ta(Time of arrival of clock pulse at component a)
Tb(Time of arrival of clock pulse at component b)
Then,
Clock skew Ts = Ta - Tb
Factors causing Clock Skew :
- Interconnect Length
- Temperature Variations
- Capacitive Coupling
- Material Imperfections
- Differences in input capacitance on the clock inputs
Types of Clock Skew :
- Positive Skew –
This occurs when the receiving register receives the clock pulse later than it is required.
- Negative Skew –
This occurs when the receiving register receives the clock pulse earlier than required.
Contact Us